DGM10-A01 RTK Receiver

Overview

DGM10-A01 is a high performance dual-band RTK receiver with build-in antenna, which is based on CYNOSURE series chipset. It supports BDS-3 signals, along with global civil navigation systems, including GPS, BDS, GLONASS, Galileo, QZSS, and SBAS.

DGM10-A01

Features

  • Supports GPS, BDS, GLONASS, Galileo, QZSS, and SBAS
  • Integrated Real Time Kinematics (RTK)
  • State-of-the-art low power consumption design
  • Supports multi-band multi-system high precision raw data output, easy for 3rd party integration
  • The best cost-effective high precision GNSS positioning solution integrated with antenna
  • Compact size 65x65x25mm with high performance
  • One cable for power and data

Specifications

Antenna

Item Specs
Frequency Range(MHz) GPS/QZSS L1,L5, BDS B1,B2, GLONASS L1, GALILEO E1/E5a
Polarization Right-hand circular
Gain(dBi) 90° L1≥5.5 L2≥5 L5≥2.5
Phase center error(mm) ≤±2.0
Axial Ratio (dB) 90°≤3.0
LNA Gain(dB) 38±2
V.S.W.R ≤2.0
Noise Figure (dB) ≤1.8
DC Voltage (V) 5.0~5.5
Current (mA) ≤80mA
Impedance(Ω) 50

GNSS

Parameter Specifications
Constellations BDS, GPS, QZSS, GLONASS, Galileo, NavIC, SBAS
Channel 128 hardware channels
Update rates 5Hz default, max up to 10Hz
Position accuracy GNSS 1.0m CEP
SBAS <1.0m CEP
RTK 1.0 cm + 1 ppm (H)
2.0 cm + 1 ppm (V)
Velocity & Time accuracy GNSS 0.05 m/s CEP
1PPS 20ns RMS
TTFF Hot start 1s
Cold start 27s
RTK Convergence time <10s
Reliability >99.9%
Sensitivity Cold start -148 dBm
Hot start -155 dBm
Reacquisition -158 dBm
Tracking & navigation -165 dBm
Protocol NMEA-0183
RTCM 2.X, RTCM 3.X
Baudrate 230400 bps, by default
Operating condition Main supply 4.75-5.25V
Power consumption Tracking GNSS 30 mA @ 3.3V
Single system 18 mA @ 3.3V
Standby Data backup 16 uA
RTC 1.4 uA
Serial UART, 4-pins, 1.25mm pitch
Cable 2m default, other length upon request
Operating limit Velocity 515 m/s
Altitude 18,000m
Environmental conditions Operating temp. -40°C to +85°C
Storage temp. -40°C to +90°C
Humidity 95% RH
Dimensions(mm) 65 x 65 x 25
Weight (g) 120

[1] tested with a good external LNA [2] Supported upon request with special firmware

Hardware

1.25mm pitch 6P connector Pinout:

  • Black: GND
  • Red: 5V
  • Green: Tx0 of GNSS module
  • White: Rx0 of GNSS module

Applications

Package list

  • DGM10-A01 receiver

Resources